Need help on a Crossover

**Mike16W** · March 7th, 2011, 10:32 AM

I have a pair Altec 803-B woofers in a 612 cabinet with 802-D horns on top. They are both using N800-E crossover networks. I am looking to upgrade the crossover but don't know how. Any suggestions would really be appreciated
Thanks
Mike

**Cal Weldon** · March 7th, 2011, 10:53 AM

Normally you replace the caps, and test your resistors and L-pads but if your have tar filled you might to start from scratch. Do a search for your XO here.

**Cal Weldon** · March 7th, 2011, 11:15 AM

The thread I was thinking about is here but I don't see the schematic anymore.

http://www.hostboard.com/forums/alte...schematic.html

**Mike16W** · March 7th, 2011, 11:24 AM

I have torn some of the tar out of the crossover and put a couple of oil cans on the outside of the crossover. They helped a lot but the resistor network is still in there. I was hoping there was an upgraded crossover.
I also did not see a schematic at the link.

Mike